Eagle Signal Timers

CX400 Dual Setpoint Timers / Counters

Overview / Design Principle:

The CX400 is a microprocessor based, dual setpoint timer/counter housed in a standard 15 terminal CYCL-FLEX® plug-in case which allows easy removal for programming changes and replacement. Time or count operation, time range, and the type of start input switch operation are programmed with 7 miniature rocker switches located inside the unit housing.

The front panel of the CX400 is a sealed membrane keypad which provides excellent protection for most industrial environments. The time or count setpoint is entered using the increment and decrement keys for each digit position. The SET and ENT keys provide access to the setpoint, as well as to the front panel programmable software functions. These programmable functions control the pulse output length, setpoint to zero/zero to setpoint cycle progress indication, and count input scale factor. The software programming functions are indicated with prompts to help the user program these functions without the need for written instructions.

Features and Benefits:

• Keypad lock function allows viewing of setpoint, but does not allow unauthorized changes
•  
• 4 1/2 digit (19999) liquid crystal display - .5 inch high digits
• Annunciators (right of the display) flash to indicate timing or counting
• Five time ranges from 19.999 sec. to 199 hr.: 59 min.
•  
• Three count input rate speeds are programmable with a max. count display of 19999 - can be extended via count input scale factor
•  
• Designed for 120 VAC operations
•  
• Count input available for 120 volt AC or low voltage AC/DC operations
• When programmed as timer, count input circuit serves as time inhibit (without resetting the unit)

Download The Complete CX400 Technical Manual (664 kb .pdf file)