|
SX210
Microprocessor Digital Timers
Economical
, Electronic , Single Setpoint Reset Timer
Time
Ranges And 8 Operating Modes
Overview
/ Design Principle:
The SX210 timer is a
microprocessor based digital timer housed in a standard DIN style case
(68mm square cutout). The small case and front bezel require minimal
panel space yet provide large, easy to use programming keys and a .3
inch high LED display.
Features
and Benefits:
- Eight programmable
time ranges and eight output operating modes
- Operating modes and
all other setup functions programmed with miniature rocker switches
located on the back of the housing
-
- Nonvolatile RAM
memory retains setpoint, actual time values, and program parameters
(10 year expected life of data in memory)
- NEMA 4 Hosedown
Test rated
-
- Special surface
just below the display on which the function can be marked with pen
or pencil
-
- SET and ENT keys
provide access to setpoint and front panel programmed functions
-
- Programming changes
entered via increment and decrement keys
- Keypad
"lock" function allows setpoint to be viewed, but does not
allow unauthorized changes
-
- Four .3 inch red
LED displays for easy readability. Flashing
LED (right side of display) indicates unit is in timing cycle and
LED (left side of display) lights when programmed contacts are
energized
-
- Two removable
terminal blocks with screw gate style wire clamps permit prewiring
of panel without the timer in place and eliminate rewiring if unit
needs to be removed or replaced
-
- Two DPDT relay
outputs with five amp contact ratings - one is a set of
instantaneous contacts that energize when timing cycle starts and
remain energized until timer is reset, and the other is a set of
programmable contacts that can be programmed to turn on and off in
several operating modes
Download
The Complete SX210 Technical Manual (487 kb .pdf file)
|
